Publications Office of the EU
New advanced high strength steels by the quenching and partitioning (Q&P) process (NEWQP)
DisplayCustomHeader
MyPortal
čeština
BasketSummary
Webový obsah - zobrazení
Publication Detail Actions Portlet

Nástroje

Publication Detail Actions Portlet
 Uživatelské hodnocení
custom-survey-notification
Publication Detail Portlet

Publication detail

Home

New advanced high strength steels by the quenching and partitioning (Q&P) process (NEWQP)

Final report

Metadata o publikaci

The following materials and Q&P treatments were selected: CSM 2 (0.15C-3Mn-1.5Si), OCAS1 (0.25C-3Mn-1.5Si) and TKSE3 (0.28C-2.5Mn-2Si) with the corresponding Q&P cycles QT: 335ºC, PT:350ºC and Pt:100s, QT:224ºC, PT:400ºC and Pt:500s and QT: 240ºC, PT:450ºC without isothermal holding at the PT. The microstructural evolutions during partitioning revealed that more austenite was stabilized at higher PT and longer Pt and that more FM was present at higher QT. This is in the case of ideal partitioning without competing reactions. The mechanical properties, in terms of YS, UTS and TE, were ranging between 800 to 1150 MPa, 1100 to 1850 MPa and 8 to 15%, respectively. The formability and fracture analysis revealed a strong influence on the microstructure of the steels. The fatigue analysis showed that the QP steels have less fatigue sensitivity than commercial steels with similar mechanical strength. The phase model modelling (PFM) of the microstructure development was carried out. The C partitioning between the carbon supersaturated ferrite and the austenite at the QT for different partitioning condition was evaluated. Modelling of the polycrystalline microstructure of austenitic and martensitic phases by integrating Phase Field and Ginzburg-Landau approaches was carried out. The pilot-plant production parameters were evaluated and compared to process-windows in industrial production. The welding and galvanizing were successful, after some parameter optimization. The FEM simulations revealed failure in some components. The spring back behaviour was studied with the bumper geometry. Finally, the LCA showed that energy required to produce these new QP steels is comparable to that of commercially available steels.
Zobrazit více
Zobrazit méně
ISSN 1831-9424
ISBN 978-92-79-53368-6
DOI 10.2777/104771
Katalogové číslo KI-NA-27552-EN-N
ISSN 1018-5593
ISBN 978-92-79-53367-9
DOI 10.2777/951031
Katalogové číslo KI-NA-27552-EN-C
PDF
ISSN 1831-9424 ISBN 978-92-79-53368-6 DOI 10.2777/104771 Katalogové číslo KI-NA-27552-EN-N
Tištěná podoba
ISSN 1018-5593 ISBN 978-92-79-53367-9 DOI 10.2777/951031 Katalogové číslo KI-NA-27552-EN-C
  • Released on EU publications website:
Tato publikace je k dispozici ke stažení v online formátu (PDF) a ve formátu vhodném pro tisk (PDF/X). Více informací o tom, jak si vytisknout vlastní kopii publikací EU, naleznete v Často kladené otázky.
Publication Viewer

Prohlížeč dokumentů

Pop up window annotations