The subject-matter of the contract is: Lot 1 – Delivery of the following on WWTP Genk – V0105018 1. Two sludge dewatering centrifuges with corresponding electric board for operation and (automatic) control of the sludge dewatering centrifuges. The aim is to achieve a nominal throughput of 800/1200kg ds/h per centrifuge. 2. Two PE production and dosing system (suitable for emulsion polymer). Powered, controlled and (automatically) operated by the corresponding electric board for the operation and control of the sludge dewatering centrifuge. 3. The additional interfaces required, both hardware and software, in order to integrate the sludge dewatering centrifuges and PE installations into the sludge processing process of the installation concerned. 4. These machines with peripheral equipment will be set up by third parties and electrically connected. It must therefore be delivered ready, which means that all fittings and connection points (flanges, clamps, ...) are included in the delivery. 5. Developing and making available assembly instructions, layout drawings, diagrams, directives per centrifuge. 6. Providing technical assistance, which is necessary to enable the machine to be set up by third parties and to connect electrically per centrifuge. 7. Delivery file (including: documentation, manuals, diagrams and plans) 8. The placing in service of the machine and peripheral equipment from the supplier's own supply and assistance with the placing in service of the delivered equipment by third parties is the responsibility of the supplier. All this according to the applicable guidelines and specifications. 9. Operator training and necessary maintenance Lot 2 – Delivery of the following on RWZI Sint-Niklaas – V0036013 1. Two sludge dewatering centrifuges with corresponding electric board for operation and (automatic) control of the sludge dewatering centrifuge. The aim is to achieve a nominal throughput of 500/800 kg ds/h. 2. Two PE production and dosing system (suitable for emulsion polymer). Powered, controlled and (automatically) operated by the corresponding electric board for the operation and control of the sludge dewatering centrifuge. 3. The additional interfaces required, both hardware and software, in order to integrate the sludge dewatering centrifuge and PE installation into the sludge processing process of the respective installation. 4. This machine with peripherals will be set up by third parties and electrically connected. It must therefore be delivered ready, which means that all fittings and connection points (flanges, clamps, ...) are included in the delivery. 5. Developing and making available assembly instructions, layout drawings, diagrams, directives per centrifuge. 6. Providing technical assistance, which is necessary to enable the machine to be set up by third parties and to connect electrically per centrifuge. 7. Delivery file (including: documentation, manuals, diagrams and plans) 8. The placing in service of the machine and peripheral equipment from the supplier's own supply and assistance with the placing in service of the delivered equipment by third parties is the responsibility of the supplier. All this according to the applicable guidelines and specifications. 9. Operator training and necessary maintenance
Text automatically translated in your browsing language
