The subject matter of this contract is the supply of one used refuse collection vehicle for the needs of the Municipal Enterprise ‘Building and utilities’. The delivered refuse collection vehicle should be used with a pre-sales service and loaded with all necessary liquids and materials for its operation and meet the following technical requirements: Description-Technical parameters and characteristics of the Employer I. Base car: - make and model to be specified by the Participant; Date of first registration - after 1 January 2019. Range travelled - maximum 135 000 km Wheel formula - wheel formula 6x4; - first and third axes steered (turning); - first axis with hydrostatic drive; - second axis with permanent drive; Total weight - minimum 26,000 kg; Wheelbase / wheelbase/ between first and second axles - maximum 4 000 mm; Suspension - first axis reciprocating; - second and third axles pneumatic; - blockage of the differential; Engine - diesel/hydride/methane/electric; - environmental norm – minimum EURO 6; - power – minimum 310 kW; - working volume – minimum 12 500 cm3; Gearbox - gearbox - automated (without clutch pedal); - control lever - located on the steering console; - minimum two control modes - manual and automatic; - number of gears - minimum 12 forwards and minimum 1 rearwards; Braking system - pneumatic bicircular with automatic adjustment; - brake systems ABS and ASR; - a parking brake capable of holding the vehicle on a gradient; Cabin and cab equipment - driver's cab with dimensions: an internal height of at least 1 600 mm; an internal width of at least 2 000 mm; - number of seats of at least 1+2, separate seats fitted with three-point safety belts; - left-hand steering wheel, adjustable; - multifunction steering wheel to control at least: radio (on/off, volume control), autopilot – tempo (on/off, speed setting, etc.), calling information on – fuel consumption, total mileage in km, daily mileage in km, journey time, failure reports, – air conditioning or air conditioning; - electric windows and mirrors; - engine start-stop button - heated rear-view mirrors; - tempomat; - on-board computer in Bulgarian language; - display on the driver's dashboard to record time, outdoor temperature, daily mileage and overall mileage, engine running time, remaining mileage with available fuel and AdBlue additive, driving speed, gear in which the vehicle is driven, pressure in the pneumatic braking system, coolant temperature, maintenance light indication; - audio system - multimedia radio with touch screen control display; - driver's seat with air suspension - central locking; Support systems: - additional hydrostatic propulsion of the first axle - an additional system to the first axle to assist the departure of the car when driving on truncated and high-gradient roads; II. Upgrade - waste collection superstructure for servicing buckets and containers with a volume of 80 l to 1100 l - mark - to be specified by the Participant; - model – to be specified by the Participant; - type of rear-loading variopress according to the requirements of DIN EN 1501-1:2021 or equivalent; - volume of the waste bunker minimum 22 cubic meters, maximum 24 cubic meters; - volume of the receiving bath minimum 2 cubic meters - compaction degree minimum 5:1 - shutung for working with containers from 120 l to 1100 l - hydraulic system two-circular, ensuring independent and simultaneous operation of the pressing and lifting mechanism driven by P.T.O. of the base car; - a rectangular waste bunker, in which a compacting and unloading plate moving on sliding blocks located on the left and right sides of the bunker is located; - hopper made of wear-resistant steel with a bottom thickness of at least 4 mm; - the left and right sides of the bunker are curved and smooth, made of wear-resistant steel with a thickness of at least 4 mm; - inspection door located at the front of the bunker on the left and/or right side panel with interlock system; - back cover of hopper lifting with two hydraulic cylinders with hydraulic lock; - a mechanism for feeding and sealing the waste /pressing mechanism/, mounted on the rear cover of the superstructure, made of steel; - a liquid collection bath of at least 100 litres and a drain valve; - shovel and broom; Lifting mechanism for vessels /schutung/ - mark - to be specified by the Participant; - model – to be specified by the Participant; - closed-type container handling shunt, divided into two lifting parts separately, independent by left and right sides of buckets according to EN 840-1 and mechanical locking of the container lifting mechanism according to EN 840-2 and EN 840-3; - the lifting mechanism (container lifting and reversing system) shall be of closed type /compact/; - lifting mechanism mounted on the rear cover of the superstructure by means of bolts, fast hydraulic connections, plug, allowing installation/disassembly if necessary for loading large-scale waste; - lifting mechanism with two curtains and a width of the light opening of maximum 1400 mm; - automatic activation of the compaction system when the container lifting lever is activated; - two-mode shutung lifting speed control system: When working with containers from 120 to 360 l when working with containers from 660 to 1100 l Full information about the technical characteristics of the object of delivery can be found in the Technical Specification to the order.
Text automatically translated in your browsing language
Automatically translated
