-
Published06/05/2025
-
Deadline10/06/2025
-
Opening of tenders10/06/2025
-
Today23/06/2025
Utilities
- indicates text translated automatically in your browsing language
Conversion and extension Carl-Orff-Gymnasium - Ventilation centre Text automatically translated in your browsing language Automatically translated
Two ventilation systems including a sewer network are to be installed in a new school building with a gymnasium. Both ventilation units are to be installed in the basement (integration via a feed shaft). Ventilation system 1 is a device for approx. 30,000 m3/h (ZUL/ABL) and two thermodynamic treatment stages (heating and cooling). A total of 12 classrooms, some other group rooms and sanitary facilities, as well as the single-seater sports hall are supplied via this ventilation unit over 3 floors (UG to 1st floor). For the exhaust air of the sanitary rooms, individual room fans are planned, which are to be installed in the course of the work. On the two upper floors drywalls with a sliding ceiling connection are planned. Apart from the ventilation centre, the room height is usually a maximum of 3.5 m. Ventilation unit 2 only includes a thermodynamic treatment stage (heating). This unit supplies sanitary and ancillary rooms on one floor (UG). The device should provide approx. 2500 m3/h (ZUL/ABL). In addition, a fan system as battery room ventilation (180 m3/h ABL) for safety lighting, fire alarm and loudspeaker system must be installed in the new building. In addition, a part of the sewer network in an adjacent existing building must be dismantled and, adapted to the new spatial planning, renewed. These are four rooms plus hallways. In both buildings, insulation work is carried out by a separate procurement unit. Fire protection, on the other hand, must be carried out by the Contractor in the ventilation sector. New building: Component E (corresponds to the class, groups and sanitary rooms, as well as the ventilation centre) Ventilation units: 2 pcs (RLT 01, RLT 02) and battery room ventilation Single room fans: 14 pcs ventilation duct incl. fittings (up to 2000 mm edge length): approx. 2500 m2 coiled seam tube (up to DN 200): approx. 260 m round fittings (up to DN 200): approx. 745 pcs flex tube (up to DN 160): approx. 156 m silencer (round and square): 65 pcs volume flow controller (round, angular, constant, variable): approx. 85 pcs. throttle valves: 1 pcs. disc valves (up to DN 200): approx. 20 pcs. slotted outlets (2 to 4 rows, partly tape version): approx. 245 pcs weather protection grilles (up to 1500 mm edge length): 2 pcs roof hoods (single/combined): Fire dampers (round, angular, wet installation, dry installation, installation with installation kit): approx. 55 pcs Component S (equivalent to sports hall, auxiliary and sanitary rooms in the basement): Ventilation units: No single room fans: no ventilation duct including fittings (up to 1000 mm edge length): approx. 400 m2 coiled seam tube (up to DN 315): approx. 265 m round fittings (up to DN 200): approx. 100 pcs flex tube (up to DN 160): no silencer (round and square): 20 pcs volume flow controller (round, angular, constant, variable): approx. 20 pcs. throttle valves: no disc valves (up to DN 200): approx. 15 pcs. slotted outlets (2 to 4 rows, partly tape version): no weather protection grilles (up to 1500 mm edge length): No roof hoods (single/combined): no swirl outlets: approx. 8 pcs. long throw nozzles: approx. 6 pcs air grille: approx. 4 pcs fire dampers (round, angular, wet installation, dry installation, installation with installation kit): approx. 30 pcs Stock: Ventilation units: No single room fans: no ventilation duct including fittings (up to 1000 mm edge length): approx. 320 m2 coiled seam tube (up to DN 315): approx. 50 m round fittings (up to DN 200): approx. 100 pcs flex tube (up to DN 160): no silencer (round and square): 11 pcs volume flow controller (round, angular, constant, variable): approx. 11 pcs. throttle valves: no disc valves (up to DN 200): no slotted outlets (2 to 4 rows, partly tape version): approx. 30 pcs weather protection grilles (up to 1500 mm edge length): No roof hoods (single/combined): no swirl outlets: no long throw nozzles: No air grilles: no fire dampers (round, angular, wet installation, dry installation, installation with installation kit): approx. 20 pcs Text automatically translated in your browsing language Automatically translated
https://plattform.aumass.de/Veroeffentlichung/av254fea-eu
https://plattform.aumass.de/Veroeffentlichung/av254fea-eu
Type: price
Description: Die Gewichtung der Angebote erfolgt zu 100% nach Preis. Der Preis ist das alleinige Zuschlagskriterium.
Weight (percentage, exact): 0
This content published on this page is meant purely as an additional service and has no legal effect. The Union's institutions do not assume any liability for its contents. The official versions of the relevant tendering notices are those published in the Supplement of Official Journal of the European Union and available in TED. Those official texts are directly accessible through the links embedded in this page. For more information please see Public Procurement Explainability and Liability notice.