The subject of the contract is the delivery of the ALSE chamber suitable for carrying out tests according to the following standards: ISO 11452-2:2019 (full-compliance), ISO11452-4:2020 (full-compliance), MIL-STD-461G (full-compliance); for objects with dimensions up to SxGxW 2.5x1.5x1.2m. The test objects will be able to be powered and connected to communication, data acquisition and cooling media conditioning systems. The minimum technical requirements are specified in § 2. DESCRIPTION OF THE PROCUREMENT OBJECT OF SWZ 3. Additional requirements: 3.1 Installation and acceptance of the subject of the contract 3.1.1 within 4 weeks after signing the contract, an organizational meeting will be held at the headquarters of the BOSMAL Institute in order to determine the schedule of work. 3.1.2 within 4 weeks of signing the contract, the Contractor shall specify any installation requirements necessary for the operation of the equipment. 3.1.3 At least 2 weeks before assembly, the Contractor shall inform the Institute of his readiness for delivery. 3.1.4 The media parameters available at the BOSMAL Institute are as follows: a. power supply: 400 V ±5%, 230 V ±5% b. compressed air: 8 bar. c. circulating cooling water: supply pressure 3 ... 5 bar; temperature: 5 ... 30 0C. 3.2 The Contractor will be required to provide basic training on the date of performance of the subject of the contract. The provision of training and the costs of implementing this part of the subject of the contract should be included in the price of the tender. 3.2.1.place of training: the seat of the Ordering Party. 3.2.2.duration of training - at least 2 days of training covering the following scope: a. activities preceding the use of the enclosure and system components b. essential operational aspects of the enclosure, parameters to be monitored during the operation of the enclosure and components c. maintenance of the enclosure and system components. At the end of the training, the Contractor is required to issue certificates of completion of the training and to provide training materials in written or electronic form. The training materials may in part be in a language other than Polish, but the basic information constituting the principles of service and safety must be in Polish. Any reference in the tender specifications to the type, trade marks or origin of the subject-matter of the contract shall be read together with the words ‘or equivalent’. Where reference is made in the description of the subject-matter of the contract to standards, technical assessments, technical specifications and technical reference systems, the Contracting Authority shall allow equivalent solutions. If equivalent solutions are offered, the Contracting Authority will not reject the tender on the sole ground that the offered supply does not comply with the standards, technical assessments, technical specifications and technical reference systems to which the description of the subject-matter of the contract refers, provided that the contractor proves in the tender, in particular by the means of evidence referred to in Articles 104-107 of the Act, that the proposed solutions meet to an equivalent extent the requirements set out in the description of the subject-matter of the contract. Where the description of the subject-matter of the contract refers to performance or functional requirements, the Contracting Authority shall not reject a tender in accordance with the Polish Standard transposing a European standard, standards of other Member States of the European Economic Area transposing European standards, with a European Technical Assessment, with a common technical specification, with an international standard or with a technical reference system established by a European standardisation body, if those standards, technical assessments, specifications and technical reference systems relate to performance or functional requirements specified by the Contracting Authority, provided that the economic operator proves in the tender, in particular by the means of evidence referred to in Articles 104 to 107, that the supply meets the performance or functional requirements specified by the Contracting Authority. 4. The detailed description of the contract is contained in § 2. DESCRIPTION OF THE PROCUREMENT OBJECT AND IN THE PROCUREMENT DOCUMENTS.
Text automatically translated in your browsing language
Automatically translated
