New sports hall Friedrichsthaler Chaussee 65, Oranienburg OT Friedrichsthal In the coming years, a "school and sports campus" is to be built at the location of the primary school Friedrichsthal. In addition to an already completed primary school, a multifunctional, barrier-free sports hall is planned, which will offer space for up to 400 spectators as a meeting place. The clubhouse of the football club is integrated and outdoor sports facilities are manufactured for school use and public use. PRINCIPLE: It is the parcel 40 of the corridor 2, district Friedrichsthal with a total size of 29.446m2. In addition to the sports hall, there is a football lawn and training area as well as the newly built school building with break areas and parking space. The topography of the property is just. The plot is part of the development plan no. 110 and is located in the protection zone IIIB of the water protection area Oranienburg-Sachsenhausen as well as in the landscape protection area "Obere Havelniederung". The ground survey of the adjacent school building is currently valid. Further drilling has already been carried out in the area of the new sports hall building. BUILDINGS: The planned doubt sports hall with the clear dimensions (W x L x H) 22m x 45m x 7.50m can be divided into two sports areas with separate entrances by a partition curtain. There are seats for 220 spectators in the grandstand. A two-storey social wing and a one-storey technical and storage wing are grouped around the hall. The building is at ground level and not basement. In addition to the room program of sports halls according to DIN 18032-1, there is a multifunctional room with adjoining rooms that can be used by the community, as well as separately accessible rooms for the football club, including a club room with adjoining rooms, as well as referee and utility rooms. TRAGWERK: The building is constructed in solid construction of reinforced concrete and KS masonry. A reinforced concrete skeleton consisting of prefabricated columns and KS masonry infills will be erected in the area of the hall. The stabilization of the social wing and the technical area is carried out via horizontal ceiling and vertical wall panels, which go through to the foundation. The stabilization of the hall area is carried out via the roof structure and the clamped precast columns in conjunction with infill masonry walls in KS. The ceilings of the social wing and the technical area are made of prestressed concrete hollow slabs as prefabricated parts and, in some cases, of reinforced concrete. The cantilevered ceiling above ground level is designed as a reinforced concrete ribbed ceiling made of prefabricated parts with in-situ concrete supplement (Pi ceiling). In some areas, installation pipes for ELT are inserted into the tr. construction. ROOF: The roof structure of the hall consists of timber trusses in glulam with a support shell made of trapezoidal steel sheet with acoustic perforation. The thermal insulation of the roof surfaces is made of rock wool, partial surfaces as EPS insulation. The hall roof and the roof of the equipment wing are coated with gravel. The social wing is given an extensive green roof. The hall roof is intended for the installation of a photovoltaic system. CHARACTERISTICS: On the outside, a mineral WDV system is planned, in the area of the building entrances, partial areas are designed as a curtain wall. CONSTRUCTION: Non-load-bearing walls are made of KS masonry and drywall. The walls are provided with lime cement plaster. In all rooms - except warehouses and technical rooms, GK ceilings are provided - in parts with acoustic perforations. The following materials are used in the expansion: - Walls: Interior plaster with paint or wall tiles - floor: Floating (heating) screed with rubber coating, industrial parquet, PUR coating or tiles - impact wall Sports hall: Acoustic slats, multiplex - Doors: Steel enclosing frames with HPL-coated door leaves made of wood-based material, as well as steel tubular frame doors - Windows: Plastic profiles in the social wing; otherwise steel profiles with venetian blinds. - Post-bar facades (hall): Steel profiles, some with external venetian blinds Electrical installation Complete electrical installation of the building, including sound system, data network, general lighting systems in LED version and a safety lighting system with central battery system. The main entrances are equipped with a video intercom. In addition, call systems for disabled sanitary areas, a sound system, a fire alarm system of cat. 1 and a burglar alarm system installed. A PV system is to be installed on the sports hall roof. HEATING: For the heat supply of the building, 2 units of air heat pumps are provided on the roof via Technology Room III. The air heat pumps are used to heat the rooms of the two-storey sociable wing as well as for water heating. To support space heating and water heating, solar thermal energy is installed on the roof of the sports hall. The hall area is heated exclusively by the ventilation system RLT 01. 8 fresh water stations are provided for the hot water heating of the shower areas. The rooms of the social wing are heated by means of underfloor heating. SANITARY: Drainage is carried out via collecting pipes made of hot water resistant PP pipes with aeration/venting. The drinking water supply within the building is carried out with metal composite pipe. VENTILATION: The ventilation unit with heat recovery of the sports hall and grandstand is installed on the roof. Construction site / Note School operation An approximately 100 m long construction road leads from the main road to the sports hall building planned in the rear part of the property, where there is space for manoeuvring the construction site vehicles. The construction work takes place during the ongoing school operation. The safety of children and teachers must be ensured at all times.
Text automatically translated in your browsing language
Automatically translated
