Tender reference number
Not available
Description
SZP/243-170/2025 Delivery of a resonant strength machine for fatigue testing with instrumentation as part of the needs of the Faculty of Mechanical Engineering of the Wrocław University of Technology 1. The subject of the contract is the delivery of a brand new resonant strength machine for fatigue testing with instrumentation as part of the needs of the Faculty of Mechanical Engineering of the Wrocław University of Technology. The required fatigue machine is purchased for fatigue life tests and measurements of the propagation velocity of fatigue cracking of engineering materials and tensile-compression and flexural fracture resistance tests. The equipment ordered must be capable of performing fatigue tests in the frequency range of 50-250Hz and full recording of mechanical parameters in real time (including recording of crack length). 2. A detailed description of the subject-matter of the contract can be found in Annex 3 to the FTZ – OPZ, respectively. 3. The detailed scope of performance of the subject-matter of the contract, which is the draft provisions of the public procurement contract, is contained in the model contract, constituting Annexes No 2 to the FTZ. 4. CPV code: 38000000-5 Laboratory, optical and precision equipment (except glass). 5. The term of the Agreement is up to 6 months from the date of conclusion of the Agreement. 6. Details of the date and conditions for the performance of the subject of the contract can be found in the model contract, which is Annex 2 to the FTZ. 7. In accordance with Article 257 of the Public Procurement Law, the contracting authority provides for the possibility of cancelling the procedure in question if the funds which the contracting authority intended to allocate to finance all or part of the contract have not been allocated to it. 8. The Contracting Authority provides for the use of the so-called reverse procedure referred to in Art. 1 uPzp, i.e. The contracting authority will first examine and evaluate the tenders, and then make a qualitative selection of the Contractor whose tender was the highest rated, in terms of the absence of grounds for exclusion and compliance with the conditions for participation in the procedure. 9. The Contractor shall be bound by the tender from the closing date for the submission of tenders until 23/11/2025 (not longer than 90 days). 10. The tender must consist of: 10.1. the Contractor's offer form – an interactive form available on the e-Procurement Platform, indicating in particular the offer price for the entire subject of the contract) 10.2. the statement referred to in section VII point 1 SWZ - JEDZ - an interactive form available on the e-Procurement Platform 10.3. VII point 1a of the FTZ - (respectively) Declarations Nos 5.1 and 5.2 to the FTZ; 10.4. (if applicable) the commitment of the provider referred to in Chapter point 3.3 of point VII of the FTZ; 10.5. (if applicable) the demonstration of the reservation of information constituting a trade secret in accordance with Chapter III. X point 6; 10.6. document(s) from which the right to sign the Offer arises in accordance with section X point 15 of the FTZ; (if applicable) the relevant powers of attorney in accordance with Chapter X point 16 of the FTZ; 10.7. (if applicable) Statement of contractors jointly applying for the contract - in accordance with Art. 4 UPpp. 10.8. (if applicable) the means of proof in question in accordance with Section 9. II. FTZ for equivalent tender; In accordance with Article 107 of the Public Procurement Act, if the Contractor has not submitted the evidence in question or the evidence in question is incomplete, the Contracting Authority will call for it to be submitted or supplemented within the prescribed period (current on the date of its submission). This rule shall not apply if, despite the submission of the measure of inquiry in question, the tender is rejected or there are grounds for invalidating the procedure. 10.9. Attachment No 3 to the FTZ OPZ - description of the offered subject of the contract (technical specifications) together with the Remuneration Specification - confirming that the Contractor meets the requirements of the Contracting Authority (including possible Information for Contractors). The Contractor shall submit, together with the Tender, Annex 3 to the OPZ, duly completed and signed. The Contracting Authority considers the parameters proposed by the Contractor in Annex 3 to the OPZ – the parameters offered by the Contractor – to be the evidence in question. Requirement to indicate: The ‘name, type, model and manufacturer’ does not constitute the evidence in question. In accordance with Article 107 of the Public Procurement Act, if the Contractor has not submitted the evidence in question or the evidence in question is incomplete, the Contracting Authority will call for it to be submitted or supplemented within the prescribed period (current on the date of its submission). This rule shall not apply if, despite the submission of the measure of inquiry in question, the tender is rejected or there are grounds for invalidating the procedure.
Text automatically translated in your browsing language
Automatically translated
Submission Method
Electronic via:
https://ezamowienia.gov.pl/mp-client/search/list/ocds-148610-cf8b4aea-5279-4586-a778-c495b3cc21e5
Tenders may be submitted
Electronic submission: required
https://ezamowienia.gov.pl/mp-client/search/list/ocds-148610-cf8b4aea-5279-4586-a778-c495b3cc21e5
Information about a public contract, a framework agreement or a dynamic purchasing system (DPS)
Not available
Conditions for opening tenders (date)
26/08/2025 11:00
Award method
Oferowana cena ogółem brutto za całość przedmiotu zamówienia [„Cena” - C]
Estimated value
Not available
Final contracted value
Not available
Award of contract
Not available
