SZP/243-236/2026 Delivery of metal 3D printer in WAAM technology.

Text automatically translated in your browsing language

SZP/243-236/2026 Dostawa drukarki 3D do metalu w technologii WAAM.

1. The subject of the contract is the supply of a 3D printer for metal in WAAM technology. Place of delivery: Wrocław University of Technology, building B-9, ul. Łukasiewicza 7-9, 50-371 Wrocław CPV code: 42962000-7 Printing and graphic devices 2. The delivered subject of the order must be brand new, complete and technically efficient. ‘Factory new’ means the subject-matter of the contract not used before the date of delivery, excluding the use necessary to test its correct operation after production. The subject of the contract must be free from physical and legal defects and claims of third parties. 3. A detailed description of the subject-matter of the contract can be found in Annex 3 to the FTZ-OPZ. 4. The detailed scope of performance of the subject-matter of the contract, which is the draft provisions of the public procurement contract, is contained in the model contract, constituting Annexes No 2 to the FTZ. 5. The delivery period is up to 180 days from the date of conclusion of the Agreement. 6. In accordance with Article 257 of the Public Procurement Law, the contracting authority provides for the possibility of cancelling the procedure in question if the funds which the contracting authority intended to allocate to finance all or part of the contract have not been allocated to it. 7. The Contracting Authority provides for the use of the so-called reverse procedure referred to in Art. 1 uPzp, i.e. The contracting authority will first examine and evaluate the tenders, and then make a qualitative selection of the Contractor whose tender was the highest rated, in terms of the absence of grounds for exclusion and compliance with the conditions for participation in the procedure. 8. The Contractor shall be bound by the tender from the closing date for the submission of tenders until 05/01/2027 (90 days). 9. The tender must consist of: 9.1. the Contractor's tender form – an interactive form available on the e-Procurement Platform; 9.2. the statement referred to in section VII point 1 SWZ - JEDZ - an interactive form available on the e-Procurement Platform; 9.3. the statement referred to in section VII point 1a of the FTZ - (respectively) Declarations Nos 5.1 and 5.2 to the FTZ; 9.4. (if applicable) the commitment of the provider referred to in Chapter point 6 of point VII of the FTZ; 9.5. (if applicable) the demonstration of the reservation of information constituting a trade secret in accordance with Chapter III. X point 6; 9.6. the document(s) from which the right to sign the Offer arises in accordance with section X point 18 of the FTZ; (if applicable) the relevant powers of attorney in accordance with Chapter X point 19 of the FTZ; 9.7. (if applicable) Statement of contractors jointly applying for the contract - in accordance with Art. 4 UPpp. 9.8. SUBJECT MEASURES OF EVIDENCE: technical specification of the devices included in the system (robot, manipulator and technological sources for the GMA and PTA method) - confirming that the deliveries offered by the Contractor meet the requirements specified by the Ordering Party. 10. Contractors who are not subject to exclusion under the rules set out in Chapter VI of the FTZ may apply for the award of the contract and meet the conditions for participation in the procedure set out by the Contracting Authority. 11. Contractors may apply for the award of the contract if they meet the conditions relating to: 11.1. the Customer's ability to trade in business does not impose a condition in the above scope. 11.2. the right to conduct a specific business or professional activity, provided that it results from separate provisions, the Employer does not make a condition in the above scope. 11.3. the economic or financial situation of the Ordering Party does not impose a condition in the above scope. 11.4. technical or professional ability The Ordering Party makes a condition in the above scope. The contracting authority shall not apply the level of capacity specified in the provisions issued pursuant to Art. 5 of the Act of 5 August 2025 on the certification of public procurement contractors (Journal of Laws of 2025, item 1235) because an appropriate level of capacity has not been determined for the subject-matter of this contract. The following conditions for participation in the procedure can therefore be confirmed only by the subjective means of evidence indicated in Chapter VII, point 7.4 of the FTZ, submitted at the request of the contracting authority pursuant to Article 126 sec. 1 of the PPL Act. The Contracting Authority will consider the condition to be fulfilled if the Contractor demonstrates that he has duly completed during the last three years before the deadline for submitting tenders, and if the period of operation is shorter – during this period, at least two deliveries of a WAAM metal 3D printer covering both the PTA method and the GMA method – i.e. installations covering simultaneously the PTA and GMA methods with a gross value of at least PLN 1 million each of the deliveries (a separate contract); or at least two deliveries of a 3D printer for metal in WAAM PTA technology and at least two deliveries of a 3D printer for metal in WAAM GMA technology worth at least PLN 600,000.00 gross each delivery (separate contract). For the above-mentioned values indicated by the Contractor in a currency other than PLN, the Contracting Authority will accept a conversion rate based on the average exchange rate of the National Bank of Poland for a given currency on the date of initiation of these proceedings. According to Art. 3 of the PPL Act and Articles 40 and 41 sec. 2 of the Act of 5 August 2025 on the certification of public procurement contractors, in this supply contract procedure, the contractor’s capacity certificate cannot be used to confirm the experience condition set out in this Chapter. Compliance with this condition is subject to confirmation by means of evidence specified in Chapter VII, point 7.4 of the FTZ.

Electronic via:
https://ezamowienia.gov.pl/mp-client/search/list/ocds-148610-57c53e65-7a52-41ab-8a8b-9a864ba89165

Electronic submission: required
https://ezamowienia.gov.pl/mp-client/search/list/ocds-148610-57c53e65-7a52-41ab-8a8b-9a864ba89165

Not available

08/10/2026 10:30

PL514 Miasto Wrocław
PL Polska

42962000 - Printing and graphics equipment

30000000 - Office and computing machinery, equipment and supplies except furniture and software packages

30200000 - Computer equipment and supplies

Oferowana cena ogółem brutto za całość przedmiotu zamówienia [„Cena” - C] - 100%

Not available

Not available

Not available