Subject of the contract: ‘Supply of 1 factory new multifunction sweeper with attached equipment’. A Technical Specification, available in the buyer profile of Topolovgrad Municipality, has been prepared and bidders should prepare their bids in accordance with it. Technical data valid according to standard DIN EN 15429: Technical characteristics requirements Base machine and towed machinery brand new, newly manufactured after 01.01.2026. Base machine make, model EU type-approval with respect to registration of base machine as tractor T2a (LoF) (agricultural and forestry machine) Machine weight in empty condition without brushes Max. 2100 kg. Maximum permissible weight max. 4500 kg Wheelbase max. 1790 mm Machine dimensions • length max. 4150 mm • width minimum 1210 mm • height max. 2150 mm. • 2-brush length min 4400 mm Engine • Diesel • Emission level - minimum corresponding to 2016/1628 EG Stage V • power between -min 50 kW - max . 65 k W • engine capacity – min, 1900 – max. 2200 cm3 • maximum running speed when travelling – min. 40 km/h • fuel tank capacity maximum 65 l Drive • hydrostatic drive, 4x4 Brake system • dynamic brake Chassis • steel with articulating hinged joint; • minimum cornering angle - 45° • Quick changer for attachments Cab • single-seat safety comfort cab conforming to a passive safety standard - ROPS (Roll over protective structures) • two doors glazed with openable windows • steering wheel - centrally located • change of direction (forward, backward) - by pedals or by joystick • presence of a motor-hour counter • reversing camera • presence of a multifunction display indicating the operating status of the machine with minimum warnings for: -battery condition, -engine temperature, -engine warm-up, -fuel level; Hydraulic system • high pressure two-circuit hydraulic system - minimum 190Bar with electrically controlled control panel • front hydraulic line - minimum 50 l/min; • Rear hydraulic line - minimum 321/min; Electrical system • Voltage - 12 V • Battery - 12 V 85 Ah • Traffic lights • Front lights • Warning orange jar light Air-conditioning system • Air-conditioning Front lift • Front lift capacity - minimum 600 kg • presence of a quick-changer with hydraulic fast connections Metall system • Front sweeping system with brushes protected against impacts • minimum - two brushes, hydraulically driven, with adjustment of the rotation speed of the brushes from the cab • diameter of the brushes - minimum 850 mm; Suction hole • Suction hole in wheelbase, shock-proof • Working width - minimum 550 mm • Suction canal - minimum 180 mm Dust control • Adjustable water tank system for water injection on brushes and in the suction canal • Adjustable water injection pressure on brushes • Possibility to inject water under pressure without turning on the brushes • Capacity of the water tank - minimum 200 litre water tanks • PM 10 Dust certificate Hopper • Structure - metal resistant to corrosion or aluminium • Hopper volume according to DIN EN 15429 – minimum 1430 l • Usable hopper volume according to DIN EN 15429 - minimum 1086 l • Hydraulic lifting and unloading - tipper type, from the cabin • Emergency manual pump for lifting the hopper • Minimum unloading height - 1440m • Maximum unloading width - minimum 930 mm • Hand suction hoseer length 3 Attachment tank with washing system • Tank capacity 1000 l. • Hose reel and nozzle with hose length of minimum 10 m. • Beam with washing nozzles with working width of minimum 1000 mm Snow rake • Total width - minimum 1600 mm • Rake height of minimum 500 mm • Polyruethane knife • Anti-corrosion coating • Weight maximum 140 kg Attachment pessary • Volume minimum 700 л • Non-metallic material bunker • Spraying disc with anti-corrosion coating • Maximum spray width - minimum 5 m. • For direct installation in place of the bunker Attachment hair module • Working width minimum 150 cm • Minimum 3 cutting knives • Mowing height adjustment Registration • possibility of registration of the machine in the Regional Directorate of Agriculture. Comments: The proposal of the participant must comply with the above-mentioned standards, performance, functional requirements, parameters, certificates, etc. or be equivalent to them. Proof of equivalence (including full compatibility) is the responsibility of the participant concerned. It is a mandatory requirement for the participants to attach the following documents, according to the requirements of the Employer: 1. Brochure (catalogue) from the manufacturer, accompanied by a translation into Bulgarian 2. Evidence that the participant is a manufacturer of the machinery or an official representative authorised by the manufacturer or the official representative of the manufacturer for the territory of the Republic of Bulgaria. 3. Technical Support Manual – in Bulgarian. 4. Other documents at the participant's discretion. Comments: The maximum time limit set by the Contracting Authority for delivery of the machine is 40 calendar days from the date of the contracting letter from the Contracting Authority (written request); The minimum time limit set by the Contracting Authority for delivery of the machine is 10 calendar days from the date following a written request by the Contracting Authority; The warranty period determined by the Assignor, without limitations in the operational resource, is not less than 12 months from the date of the protocol for acceptance of the delivery, in accordance with the provisions of the contract.
Text automatically translated in your browsing language
