A.) General requirements: The tools offered by the Tenderers can only be new tools. Quality acceptance of the equipment shall take place at the premises of the contracting authority. The contracting authority draws the attention of the tenderers to the fact that the technical parameters included in the technical specifications contain the minimum technical requirements of the contracting authority, and the contracting authority accepts equivalent (or better) technical parameters. Equivalence is awarded to the tenderer in accordance with Decree 321/2015. You must prove it in your tender in accordance with Chapter VII of the Government Decree (X. 30.). A 321/2015. In view of the provisions of Section 46(3) of Government Decree No 30/2010, tenderers are reminded that references to items, procedures, activities, persons, patents or trademarks of the make, origin and type specified in the invitation to tender and the procurement documents, where applicable, were made in order to clearly and intelligibly define the subject-matter of the procurement, and ‘or equivalent’ is to be understood in all cases. All equipment must be delivered and installed at the specified location. Quantity: • 1 pc loading machine (delivery to the site, installation) • "SZTE Educational Farm" Production, Trade and Service Limited Liability Company, 6800 Hódmezővásárhely, Aranyág kert 6. B.) Quantities, technical and technical requirements: Devices shall have the following characteristics in number and to a minimum and maximum extent: • 1 pc loading machine (with delivery to the site, installation) Parameters of the device to be procured Minimum-maximum requirements, necessity Machine length (without work equipment): Width (mm) Max. 2560 mm Height (mm) Max. 2600 mm Wheelbase (mm) Max. 3000 mm Emission standard: Stage V. Minimum-maximum rated output (Down) 130-160 HP Engine displacement Max. 4100 cm3 Cab width Min. 950 mm Hydraulics Min. 150 l/min Maximum lifting capacity Min. 5400 kg Loading/lifting capacity at full height Min. 3100 kg Maximum forward elongation: Min. 3700 mm Loading/Maximum lift height: Hydraulic parking brake Mechanical Accessories Spare armor, automatic central lubrication, spoon shake, boom damping, full road lighting package and mirrors Air brake system Two-circuit air brake system Towing head Automatic trailer towing head Number of steering modes 4 Technical examination allowing the issue of a black license plate and ability to reach speeds of 40 km/h Components - Crop spoon, min. 3 m3, - Ground spoon(base spoon) with straight edge, - Sweeper min. 2,2 m working width, - Bale mandrel, - - Crocodile fork (holding fork) min. 2,2 m wide - Pallet fork - Hydraulic bale fork (for wrapped bales) - Mounting basket The design and qualification must meet the following standards: • Regulation (EC) No 765/2008 of the European Parliament and of the Council of 9 July 2008 (CE marking) The successful tenderer must attach, no later than the signature of the contract, the manufacturer’s product information(s) for the proposed machine (if the contracting authority cannot verify the correctness of the proposed parameters on the basis of data available free of charge on the internet) and the CE conformity assessment certificate(s), or equivalent, from any certification body accredited under a national system. The product information issued by the manufacturer or distributor and the CE certificate, or equivalent, must relate to the product specifically proposed. Where the Winning Tenderer offers a custom-made product (i.e. a product that differs from series production in even one parameter), it shall also provide the evidence submitted for the amendment of the CE or equivalent authorisation and shall clearly demonstrate that the product information and the CE or equivalent certificate issued by the manufacturer or distributor apply to the specifically offered custom-made product other than series production. The contracting authority shall classify the breach of the obligation laid down in this point as a regression by the successful tenderer, which shall create the possibility of concluding the public contract with the second ranked tenderer. Therefore, according to the requirements of tender VP1-1.2.1-23, the machine offered by the tenderer can only be met with machines that have been newly manufactured and put into service for the first time, and the offer of machines that can take a maximum of one and a half years from production to entry into service can be accepted. In the bid submitted by the tenderer, the documents attached by the deadline for the submission of tenders and forming part of the professional offer must include the date of manufacture and the identification number of the proposed machines. The offer price must include the theoretical and practical preparation of the operator's staff for the handling, maintenance and technical service of the device and its accessories for a maximum of 3 persons/vehicle for a maximum of 4 hours per day for a maximum of 1 day. Place of preparation: Place of delivery of the machine The place of preparation shall be provided by the Contracting Authority (Buyer) in all cases. Detailed definition in the technical specifications that are part of the procurement documents.
Text automatically translated in your browsing language
Automatically translated
