New vocational school centre, carcass work School and workshops

Text automatically translated in your browsing language

As part of the new construction of a vocational school centre in Pfarrkirchen, a four-storey school building made of reinforced concrete is required as a support-panel construction and four factory-satt buildings in monolithic reinforced concrete construction. The workshop buildings are single-storey in partial areas and three-storey in sub-areas. The buildings are installed in a hillside position. On the construction side, the excavation pit is already excavated and construction works are carried out. Supports are provided in in-situ concrete, walls in in-situ concrete, in the facade area are partly parapets made of semi-finished parts between supports via individual concreting sections. In the school building, suspended reinforced concrete-prefabricated facade elements are applied as cladding in sub-areas. A logistics building made of reinforced concrete, which was also planned on the ground and partly took place at the same time, was advertised separately. Type and scope of the service: — Floor excavation B.Kl. 3-5 ca. 200 m³ – Delivery and installation of antifreeze gravel 0/56 ca. 2.700 m³ – Delivery and installation of gravel-sand mixture approx. 3.900 m³ – Installation drainage pipes (blue/orange) in gravel packing approx. 2.100 m – installation drainage and fall shafts, partly with cast shaft cover approx. 8-28 mm, L to 18 m approx. 3.090 t – reinforced concrete as in-situ concrete foundations, exp. classes up to XC3, XD1, XF2, XM2, WF approx. 6.200 m³ – reinforced concrete as in-situ concrete ceiling slabs incl. exp. classes up to XC3, XF1, WF approx. 3.900 m³ – reinforced concrete semi-finished partition walls/pans, C30/37, 0.30 m wide, up to 1.47 m high approx. 1.000 m² – reinforced concrete cladding or in-situ concrete, widths up to 2.50 m, heights up to 2.85 m approx. 30 m wide, 4.04 m to 7.48 m long 14 pcs – reinforced concrete prefabricated facade elements as suspended facade cladding approx. 930 m² – shaft walls made of KS masonry, thickness 11.5 cm to 24 cm approx. 570 m² – waterproofing layers with polymer bitumen webs, 1-layer, hor./vertical surfaces approx. 11.800 m² – waterproofing layers with polymer bitumen webs, 1-ply, hor./vertical surfaces approx. 11.800 m² – waterproofing layers with polymer bitumen webs, 2-ply, hor./vertical surfaces approx. 265 m² – waterproofing layers with polymer bitumen sheets, 3-ply, hor./vertical surfaces approx. 200 m² – perimeter insulation, W1.2-E, XPS, WLG037 and WLG040, hor./vertical surfaces approx.

45214310 - Vocational college construction work