The subject-matter of this contract is the supply, installation, commissioning, training and commissioning of the 3T Magnetic Resonance for the purposes of the Independent Public Specialist Western Hospital named after St. John the Baptist. John Paul II in Grodzisk Mazowiecki. The contracting authority informs that the contract is co-financed by the European Union under the National Recovery and Resilience Plan, Component D ‘Efficiency, accessibility and quality of the health care system’ Investment D1.1.1 ‘Development and modernisation of the infrastructure of highly specialised care centres and other medical entities’ – project entitled ‘Development of infrastructure and technologies supporting the quality of oncological care in the St. John’s Independent Public Specialist Western Hospital. John Paul II in Grodzisk Mazowiecki", project No KPOD.07.02-IP.10-0154/24, on the basis of contract No KPOD.07.02-IP.10-0154/24/KPO/1112/2025/119 – concerns task 2. MILK STONE 2. Retrofitting of the Magnetic Resonance Laboratory. The Contractor shall, at his own expense and risk, deliver, install, install and commission a fully functional and complete ready-to-use equipment and carry out the necessary training for the staff of the hospital indicated by the Contracting Authority on the operation and maintenance of the equipment, as well as full service, including technical inspections during the quality guarantee period and warranty of the equipment/s being the subject of the contract. Service and technical inspections under the quality guarantee and warranty will be carried out at the Customer's headquarters. As part of the performance of the contract, the Contractor is obliged to: • delivery of a brand new, unused, non-reconditioned, non-refundable, factory repaired/refurbished 3T Magnetic Resonance. The year of manufacture of the offered device cannot be earlier than 2025 year. • free from physical and legal defects, installation, commissioning, training and commissioning, devices corresponding to current technical and medical standards, together with the complete equipment necessary for its proper functioning. • delivery, installation and commissioning of the device at the place indicated by the Ordering Party. • Putting into service a fully functional and complete device, ready for operation, confirmed by an appropriate acceptance protocol. • Conducting training for the Contracting Authority's medical staff in the field of operation, operation and basic maintenance of the delivered device. • Provide full service during the warranty and warranty period, including repairs, technical inspections and access to spare parts. • Close cooperation with the Contractor of construction and installation works in the field of adaptation of the room for assembly and installation of RM. The selection of the contractor for the adjustment works will be made after the selection of the magnetic resonance imaging supplier due to the fact that each device may have different technical and operational requirements. The contracting authority requires that the offered device (3T magnetic resonance imaging) be manufactured and delivered in compliance with applicable regulations and environmental standards, as well as with the six environmental objectives referred to in Article 9 of Regulation 2020/852, i.e.: 1. Climate change mitigation; 2. Adaptation to climate change; 3. Sustainable use and protection of water and marine resources; 4. Transition to a circular economy; 5. Pollution prevention and control; 6. Protection and restoration of biodiversity and ecosystems. In addition, in line with the horizontal principles stemming from the RRP and Art. 2b of Regulation 2021/241, the project must respect the principle of equal opportunities and non-discrimination, including accessibility for persons with disabilities, as well as the principle of gender equality. The Contractor must ensure that there is no discrimination in the performance of the contract and that the equipment is accessible to all users, in accordance with the principle of universal design, as set out in the UN Convention on the Rights of Persons with Disabilities, and meets the other requirements of the Contracting Authority indicated in the FTZ.
Text automatically translated in your browsing language
Automatically translated
